Source : Media Section |
اخبار القسم en
Faculty member gets a certificate of the e-learning trainers course
|
|||||
Faculty member gets a certificate of the e-learning trainers course
|
|||||
The candidate of the department, Dr. Attia Abdul-Kadhim, faculty member in the Production Engineering and Metallurgy Department / Computer Aided Design and Manufacturing Engineering Branch, obtained a certificate of completion of the e-learning trainers course, which was established by the Ministry of Higher Education and Scientific Research in cooperation with the IREX organization and the US Embassy, where the course continued for the period from May - June / 2020 . The Faculty member has completed the course with excellent grade Many congratulations and wishing him continued success and progress in service to our beloved Iraq and our dear university.
|
|||||
Commence electronic exams in the department
|
||||||||
Commence electronic exams in the department
|
||||||||
The final electronic examinations of the Production engineering and Metallurgy department commenced for the morning and evening initial studies and for all scientific branches of the academic year 2019-2020 on Saturday, 25/7/2020, under the direct supervision of the Head of Department Prof. Dr. Mona Khudair Abbas and scientific Assistant A.prof. Tahseen Fadhl Abbas with distinguished efforts by the exam committees in the department to follow up and manage the exams and handling the problems that may expose during the performance of the exam. It is noteworthy that the exams are to conduct through the educational Google Classroom equipped with all the necessary means for the success of the exam process, according to the rules and controls of the Ministry of Higher Education and Scientific Research and the presidency of the university directions in order to preserve the health and safety of students as well as the attention to the necessity of continuing the educational process in the country. This comes within the framework of precautionary measures Taken by the Iraqi government to prevent the spread of the COVD19.
|
||||||||
The competitive exam books for the academic year (2020-2021) letters MA and PhD
|
||||||
The competitive exam books for the academic year (2020-2021) letters MA and PhD
|
||||||
To all applicants for postgraduate studies in the Production Engineering and Metallurgy Department , we include below the names of the resources and chapters required in the competitive exam for Master and Doctorate for the academic year (2020-2021). We wish everyone success and permanet success
|
||||||
Final exam (online) for the second semester of graduate students
|
||||||
Final exam (online) for the second semester of graduate students
|
||||||
The Department of Production Engineering and Minerals announces that it is ready to take the final (electronic) exam for the second semester of graduate students (PhD - Master) for the academic year 2019-2020, starting on Sunday 14/6/2020, and with the approval of the Google Classroom platform, where it started direct training its students on how to perform the exam electronically, according to the directives of the University of Technology and according to the mechanism issued by the University Council According to the university order number AJ / 49 on June 2, 2020, where the exam schedule has been set ... We wish our dear students success
|
||||||
Discussion of the doctoral thesis in metallurgy engineering
|
||||||||
Discussion of the doctoral thesis in metallurgy engineering
|
||||||||
The doctoral student (Ahmed Falih Hussain), a lecturer in the Department of Production Engineering and metallurgy / Mining Engineering and Extraction Branch, was discussed for his thesis tagged:
((Enhancement of attapulgite clay properties of Al-Najaf Al Ashraf in order to be suitable for oil wells drilling))
And with a specialization in metallurgy engineering, at exactly nine o'clock in the morning on Tuesday 12/05/2020 and on the hall of the late Professor Jassem Al Hayani in the department, the discussion committee consisted
Listed below: Prof.Dr Muhammad Hillil Hafiz, Basra University of Oil and Gas ..... (President) Prof.Dr Nawal Ezzat Abdel-Latif, University of Technology / Production Engineering and Metallurgy Department / Retired ..... (member) Prof.Dr Aqeel Shaker Al-Adly, University of Technology / Department of Applied Sciences ..... (member) * Assistant Prof. Hassan Abdel-Hadi Abdel-Hussein, University of Baghdad / College of Engineering ..... (member) * Assistant Prof. Raghad Hamed Hilal, University of Technology / Department of Production Engineering and Metallurgy ..... (member) * Assistant Prof. Abdel Khaleq Fawzi Hammoud, University of Technology / Production Engineering and Metallurgy Department ..... (supervisor) * Assistant Prof. Assawer of Abdel-Rasoul Koueiri, University of Technology / Chemical Engineering Department ..... (supervisor)
|
||||||||
Discussion of a master's thesis with a specialization in Industrial Engineering
|
||||||||||
Discussion of a master's thesis with a specialization in Industrial Engineering
|
||||||||||
A master’s student in the field of Industrial Engineering (Narges Basim Akkar) was discussed, and she obtained a master’s degree (with complete estimation) for her research tagged: - ((Study of integration principles for production maximization - a case study in Al Faris company)) This will be held on Thursday, corresponding to (13/220/2020) at the hall of the late Professor Dr. Ibrahim Mahmoud Mansour in the department at nine in the morning and in the presence of the Head of Department, Prof. Dr. Mona Khudair Abbas, the Scientific Assistant of the Department, Assistant Prof. Dr. Salah Karim Jawad the mumber of Faculty, the discussion committee consisted of the gentlemen whose names are listed below: * Assistant Prof. Sawsan Subaih Abd Ali, University of Technology / Department of Production Engineering and Metallurgy .... (Chairman) * Prof. Wathiq Hiawi Laith, Sumer University .... (memberِAssistant ) * Dr. Hind Basil Ali, University of Technology / Department of Materials Engineering .... (member) * Assistant Prof. Lama Adnan Hameed, University of Technology / Production Engineering and Metallurgy Department .... (supervisor).
|
||||||||||
The Production Engineering and Metallurgy department holds a workshop
|
||||||||||||
The Production Engineering and Metallurgy department holds a workshop
|
||||||||||||
Under the Sponsored by President of the University of Technology, Prof. Dr. Ahmed Muhammad Hassan al-Ghabban, and under the direct supervision of the Chairman of the Department of Production Engineering and Metallurrgy Prof Dr Mona Khudair Abbas, the Department of Production Engineering and Metallurgy / Computer Design and Manufacturing Engineering Branch held a workshop entitled: "Smart Manufacturing and Industrial Revolution 4.0" And on Wednesday, 12/22/2020, and on the hall of the late Professor Jassem Al Hayani in the department, the workshop program included one session headed by Prof. Dr. Muhannad Mohammed al-Khafaji and Eng. Mustafa Muhammad Abdul-Razzaq, as the workshop witnessed a distinguished attendance of members of the faculty staff in the department, where It included several lectures as follows: -the first lecturer : "Application of Simulation and optimization to Manufacturing or supply chain" delivered by Dr. Attia Abdel-Kazim. The second lecture: “AM Technology” delivered by Dr. Abbas Maytham Jaber. The third lecture: “Smart automated computer aided process planning (ACAPP) for rotational parts based on feature technology and step file” delivered by Dr. Mazen Ghazi. Fourth Lecture: "Teleportation and monitoring of CNC turning products" delivered by Dr. Tahseen Fadhel Abbas / Youssef Khaled
|
||||||||||||
The Production Engineering and Metallurgy department holds a workshop
|
||||||||||
The Production Engineering and Metallurgy department holds a workshop
|
||||||||||
Under the patronage of the President of the University of Technology, Prof. Dr. Ahmed Muhammad Hassan al-Ghabban, esteemed and under the direct supervision of the Chairman of the Department of Production Engineering and Metallurgy, Prof. Dr. Mona Khudair Abbas, the Department of Production Engineering and Metallurgy / Mining and Metallurgical Engineering Branch held a workshop under the slogan: “Zakat on science Dissemination” with the title: University work ethic and its importance in spreading science in society This will be held on Monday 10/2/2020 and on the hall of the late Professor Jassem Al Hayani in the department, where the workshop program included two sessions chaired by Dr. Sami Ibrahim Al-Rubaie, Head of the Mining Engineering and Metal Extraction Branch and M. Shaima Taleb Ghani, Rapporteur of the branch. The first session included two lectures: The first lecture: “University work ethics” Prepared by: Dr. Wafa Kamel Mahmoud, Dr. Samar Saadi Hussein and Dr. Majid Ibrahim Fadel, delivered by Professor Dr. Haider Abdul Muttalib (visiting professor from Malaysia). The second lecture: “The importance of pure and engineering sciences in society” Prepared by: Assistant Prof. Abdul-Khaleq Fawzi Hammoud and Assistant Prof. Raghad Hamid Hilal Assistant Prof. Muhannad Farhan Hamid and delivered by Dr. Abdul-Khaliq Fawzi Hammoud. While the second session included three seminars in which three scientific researches were discussed and accepted at the third international conference for science and engineering organized by the Egyptian-Japanese University in Alexandria / Arab Republic of Egypt for the period (14-17 March 2020) and he gave the seminars each of the following: Prof. Mona Khudair Abbas Prof. Sami Ibrahim Al-Rubaie Prof. Iman Adnan Anoun The workshop witnessed a distinguished attendance of all members of the faculty staff in the department
|
||||||||||
A teacher participates in the membership of a discussion committee for a doctoral thesis
|
||||||||
A teacher participates in the membership of a discussion committee for a doctoral thesis
|
||||||||
The faculty member from our department / branch of production engineering Adnan Ibrahim in a discussion committee at Salah Al-Din University - Erbil / College of Engineering for the doctoral thesis thesis (Johar Ibrahim Khadr) and tagged: (Efficiency of dissimilar friction welded (super duplex stainless steel SAF 2250, Austenitic stainless steel AISI 316 L and AISI 304-medium Carbon steel AISI 1045) joint). This was on Thursday morning, corresponding to 1/30/2020 at the University of Salah al-Din, and the student obtained a doctorate degree with a grade of (completed), where the discussion committee consisted of the masters whose names are listed below: Pro. Dr. Adnan Nehmeh Abboud, Central Technical University / Baghdad .... Chief Assistant Prof. Dr. Abdel-Qader Ali Abdel-Qader, Salahuddin University / College of Engineering .... member Assistant Prof. Dr. Azel Ismail Refaat, University of Kirkuk .... member Assistant Prof. Dr. Sarkot Rustum Hasan, Technical University / Sulaymaniyah .... member Assistant Prof. Dr. Adnan Ibrahim, University of Technology / Department of Production Engineering and Minerals .... Member Pro Dr. Sherko Abdul Karim, Salah Al-Din University / College of Engineering .... supervisor
|
||||||||
Scientific Assistant of the Department inspects the conduct of the electronic examination of the English language
|
||||||||||
Scientific Assistant of the Department inspects the conduct of the electronic examination of the English language
|
||||||||||
Scientific Assistant of Production Engineering and Metallurgy department , Assistant Prof. Dr. Salah Kareem Al-Jawad inspected course of the electronic exam for the English language course for graduate students (PhD) for the first semester (2019-2020), and was accompanied by the Director of the Department of Graduate Studies,Assistant Prof. Dr. Makarim Hazem, on Thursday morning, 6/2/2020, where the electronic exam was conducted in the primary computer lab in the department, and the scientific assistant heard the students' opinions on the nature of the questions and their compatibility with the methodology of the established scientific subject and wishing them success and success.
|
||||||||||
More...
The Head of the Department inspects the progress of the electronic examination of the English language for graduate students
|
||||||||||
The Head of the Department inspects the progress of the electronic examination of the English language for graduate students
|
||||||||||
Mr. Head of Production Engineering and metallurgy Department Prof Dr. Mona Khudair Abbas, the respected Mr. Mr. Director of the Division of Graduate Studies, Prof. Dr. Honorable Makarim Hazem visited On the morning of Wednesday, 5/2/2020, the conduct of the electronic exam for the English language course for graduate students (Master) for the first semester (2019-2020), where the electronic exam was conducted in the preliminary computer lab in the department, and the head department heard the master Section head to the students' opinions on the nature of the questions and wished them success and success
|
||||||||||
The Production Engineering and Metallurgy department holds a workshop
|
||||||||||
The Production Engineering and Metallurgy department holds a workshop
|
||||||||||
Under the patronage of the President of the University of Technology, Prof. Dr. Ahmed Muhammad Hassan al-Ghabban, and under the direct supervision of the Chairman of the Department of Production Engineering and metallurgy department , Prof. Dr. Mona Khudair Abbas, the Department in cooperation with the Central Committee for Scientific Promotion, held a workshop entitled (Instructions for Scientific Promotion) on Tuesday 4/2/2020 at the hall of the late Professor Jassem Al Hayani in the department, in the presence of Mr. Scientific Assistant .Dr. Salah Karim Jawad and a number of faculty members, where the workshop consisted of a lecture that addressed several axes (Dr. Faraj Mahal Muhammad, Prof. Dr Sami Abu Al-Nun Ajil and Assistant Prof. Khaleda Farhan Suhail). At the end of the workshop, certificates of appreciation were distributed to the lecturers and the Scientific Promotion Committee in the department
|
||||||||||
Discuss the doctoral thesis in production engineering
|
||||||||||
Discuss the doctoral thesis in production engineering
|
||||||||||
A doctoral student (Riyad Jalil Fahd) discussed his thesis tagged: ((EDM optimization parameters in machining of free form surfaces based on fuzzy logic technique)) With a specialization in production engineering, he obtained a (completed) estimate, at exactly nine o'clock in the morning on Thursday 30/1/2020 and on the hall of the late Professor Dr. Ibrahim Mahmoud Mansour in the department in the presence of Department Head Prof. Dr. Mona Khudair Abbas, a respected faculty members. The discussion committee consisted of: Prof Dr. Mohsen Jabr Juig, Al-Farahidi University ..... (President)) Prof. Saad Hameed Najem, University of Babylon / College of Engineering ..... (member)) * Assistant Prof. Maan Abed Tawfiq, University of Technology / Production Engineering and Metallurgy Department ..... (member) * AssistantProf. Inaam Obaid Hassoun, University of Technology / Electromechanical Engineering Department ..... (member) * Assistant Prof. Abbas Fadel Ibrahim, University of Technology / Production Engineering and Metallurgy Department..... (member)) * Assistant Prof. Shukri Hamid Ghadheib, University of Technology / Production Engineering and Metallurgy Department ..... (supervisor)
|
||||||||||
Discussion of a master's thesis with a specialization in Industrial Engineering
|
||||||||||
Discussion of a master's thesis with a specialization in Industrial Engineering
|
||||||||||
A master’s student in the field of Industrial Engineering (Nabil Ismail Allawi) was discussed and he obtained a master’s degree (with a grade of appreciation) for his research tagged: - ((Integration of CAD / CAE / RP environment for developing new product in medical field)) This will take place on Wednesday, corresponding to (29/1/2020) in the hall of the late Professor Dr. Ibrahim Mahmoud Mansour in the department at nine in the morning and in the presence of Mr. Scientific Assistant of the Department, Prof. Dr. Salah Karim Jawad, the esteemed And a number of faculty members, and the discussion committee consisted of listed below: Prof Dr.. Aladdin Hasan Qasim, University of Technology / Production Engineering and Metallurgy Department .... (Chairman) Prof. Ahmed Abdul-Rasul Ahmed, University of Baghdad / College of Engineering .... (member) * Assistant Prof.Dr Tahsin Fadel Abbas, University of Technology / Production Engineering and Metallurgy Department .... (member) * Dr. Amjad Barzan Abdel Ghaffour, University of Technology / Production Engineering and Metallurgy Department .... (supervisor) And given that the supervisor traveled outside Iraq in a research fellowship, I attended the Head of the Industrial Engineering Branch ,Assistant Prof. Dr. Sawsan Sobeih in place of the moderator of the discussion committee
|
||||||||||